20升-30升闭口桶
当前位置: 首页 > 产品中心  > 吹塑桶系列 > 20升-30升闭口桶

30L堆码桶

详细介绍

30L塑料桶

产品名称

30L堆码桶

外型尺寸(mm

320×270×475

桶口尺寸(mm

55

重量(kg

1.6

壁厚(mm)

1.7

满口容积(L

30

品牌

明德

原材料

高密度聚乙烯(HDPE)

原料产地

中国山东

生产工艺

吹塑+注塑

产品特性

易灌装, 易堆码, 抗挤压

物理特性

常温80度至零下40度均可使用

堆码试验

装满水堆码3,48小时不倒塌

跌落试验

装满水跌落高度2,连续3次不破裂

密封试验

装满水倾斜45°,往复摇动20次不渗漏

生产厂家

庆云明德塑业有限公司

备注

广泛适用于食品,医药,化工等行业

可提供出口商检证

品介绍采用UHMWPE(超高分子量高密度聚乙烯)生产。
1.具有高强度耐腐蚀等特点,使用寿命长、灌装、清洗方便。
2.适用性广,可广泛用于化工、石油、食品等行业的包装。
3.质量可靠,产品试验低温跌落和高温堆码试验。
4.运输便利且可采用集装箱运输。

5.该产品增加了通排气装置,针对包装具有挥发性的化学品,提高了产品运输使用过程中的安全性能。

产品主要技术指标:
密封试验:120±1秒时间内试样倾斜45°,往复摇动20次不渗漏。
跌落试验:环境温度-18℃,跌落高度1.2米,不破裂。
堆码试验:环境温度+40℃,堆码载荷3个高,坚持堆码28天,不倒塌。

Product introuduction:
1.It is made of UHMWPE (Ultra-high molecular weight and high densit polyethyl-ene).
2.It has such characteristics as high strengh and high corrosion proof etc.,provides long service life and convenient filling and cleaning.
3.It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food 

etc.
4.It has reliable quality, and the technical parameters in low-temperature drop test and stacking test of the product conform to requirements of UN standards.
5.It is convenient to transported and is applicable for container transportation.

Major technical indexes of product:
Sealing test:Tilt and swing the sample to and fro in an angle of 45°for 120±1 seconds and there shall be not leakage.
Drop test:Ambient temperature:-18℃, drop height:1.2m,no rupture.
Stacking test:Stack up in an environment with a temperature of -40℃ and under a load of 3 high for 28 days without any collapse.

30L堆码桶


(此内容由www.qymdsl.com提供)
上一个: IBC框架吨桶
下一个: 25L方桶